Enhancing the efficiency of formal low-cost houses by the development of a new low-cost ceiling system
DOI:
https://doi.org/10.17159/2413-3051/2006/v17i1a3374Keywords:
low-cost housing, low-cost ceiling system, energy efficiency, installation, thermal efficiencyAbstract
Existing formal low-cost houses in South Africa have been shown to be very thermally and energy inefficient. This could be problematic for the country since the government has promised to build roughly 3 million more of these houses in the near future. Inefficiency in these houses can be effectively addressed by installing ceilings, but the cost thereof is unfortunately too high to be affordable to the applicable sector of the population. New options need to be considered to reduce costs. Research has shown that practically any material can be used as a ceiling if it provides a barrier to heat flow and eliminates infiltration. The material should ideally possess good thermal properties and comply with standard building regulations, but most importantly, it must be very cheap and easy to install. The low-cost ceiling proposed in this paper has all of these attributes, and installation thereof could result in substantial energy savings, improved indoor comfort, and a better quality of lifeDownloads
References
African National Congress, ‘The Reconstruction and
Development Program’, Umanyano Publications, PO
Box 3851, Johannesburg, 1994.
BMI Building Research Strategy Consulting Unit, ‘The
state of the home building industry’, National
Association of Home Builders, Randburg, 1992.
Holm, D; Trieloff, K; Van Aswegen, DF; and Van Wyk, SL:
‘Towards a policy for passive thermal design in lowcost
housing’, Report compiled for the Department of
Minerals and Energy, DME, Private Bag X59,
Pretoria, August 1994.
Mathews, EH and Weggelaar, S: ‘The development, testing
and demonstration of a new energy efficient, lowcost
ceiling system for the formal low-cost housing
sector – Interim report’, Report compiled for Eskom,
Johannesburg, 1997.
McGowan, M: ‘Stretched fabric wall and ceiling systems’,
The Construction Specifier, pp. 53-54, March 1993.
Myers, DL: ‘Abuse-resistant ceiling systems’, The Construction Specifier, pp. 57-65, March 1996.
Plank, R; Amato, A and Neal, S; ‘Thermally efficient ceiling
designs’, New Steel Construction, Vol. 5, no. 4,
pp. 21-23, August/September 1997.
Robertson, WK and Kimsey, SP; ‘Design/Build: Obtaining
energy efficiency’, Heating/Piping/Air-conditioning,
Vol. 63, part 1, pp. 79-82, January 1991.
Rorich, RP: ‘Low-cost ceiling as a feasible Clean
Development Mechanism (CDM) project’, Report
compiled for Eskom, Johannesburg, pg. 3 & 17,
October 2000.
Rousseau PG and Mathews, EH; ‘A new integrated
design tool for naturally ventilated buildings, Part 1:
Ventilation model’, Building & Environment, Vol. 29,
pp. 461-471, 1994.
Surtees, RM: ‘What our customers use and when they use
it’, Report compiled for Eskom, Johannesburg, 1992.
Tully, G: ‘Some thoughts about ceilings’, The Journal of
Light Construction, pp. 9 & 11, April 1992.
Van Wyk SL and Mathews, EH; ‘The effect of ceilings and
insulation on the energy efficiency of formal low-cost
housing in the Gauteng area’, Proceedings of the
Household Energy for Developing Communities
Conference, Midrand, July 1995.
Wentzel, JD: ‘Acceptable indoor thermal environmental
conditions’, Report compiled for the CSIR,
Environmental Engineerin4g, NBRI, CSIR, Pretoria,
.png){kind=spacer}