A heat pipe heat recovery heat exchanger for a mini-drier
DOI:
https://doi.org/10.17159/2413-3051/2006/v17i1a3364Keywords:
Heat pipe heat exchangers, thermosyphons, air drying, energy savingsAbstract
This paper considers the thermal design and the experimental testing of a heat pipe (thermosyphon) heat exchanger for a relatively small commercially available mini-drier. The purpose of the heat exchanger is to recover heat from the moist waste air stream to preheat the fresh incoming air. The working fluid used was R134a and the correlations are given for the evaporator and condenser inside heat transfer coefficients as well as for the maximum heat transfer rate. The theoretical model and computer simulation program used for the thermal design calculations are described. The validity of the as-designed and manufactured heat exchanger coupled to the drier is experimentally verified. The theoretical model accurately predicted the thermal performance and a significant energy savings and a reasonable payback period was achieved.Downloads
References
Dunn DP and Reay D, 1994, Heat pipes, 4th Edition,
Pergamon.
Incropera FP and DeWitt DP, 2002, Fundamentals of
Heat and Mass Transfer, Wiley.
Meyer A, 2004, Development of a Range of Air-to-Air
Heat Pipe Heat Recovery Heat
Exchangers, MSc Thesis, University of Stellenbosch,
Stellenbosch.
Meyer A and Dobson RT, 2005, Thermal performance characterization of R134a and Butane charged twophase
closed thermosyphons, R & D Journal (submitted
for review and publication).
Mills AF, 1995, Heat and Mass Transfer, Richard D. Irwin.
Pioro LS and Pioro IL, 1997, Industrial Two-phase
Thermosyphons, Begell House.
Russwurm AE, January 1980, Q-pipes add a new dimension
to waste heat recovery, recycling energy – Part 1,
Heating, Air Conditioning & Refrigeration (Now
Refrigeration and Air Conditioning), pp 27-39.
Russwurm AE, March 1980, Recovering waste heat with
Q-pipes, recycling energy – Part 2 – Recycling energy,
Heating, Air Conditioning & Refrigeration (Now
Refrigeration and Air Conditioning), pp 45-49.
.png){kind=spacer}